Categories
Technology

A Potential Cheaper iPhone

So many caveats for this one I can’t even begin to list them all.

This entire post is based on a rumor from Mac Rumors where they took some “spy shots” of the casings for a new, cheaper iPhone and then paid someone to create a 3D model and then some “spy shots” of that 3D model.

Here you go:

Low Cost iPhoneSo, you have that. I don’t know if this is going to be released by Apple or anything similar, but I’m going to run with it anyway because there are some interesting reasons why Apple would release a second, cheaper iPhone now as compared to the past.

It boils down to four things for me:

  1. The Screen Problem
  2. The Connector Problem
  3. The LTE Problem
  4. The iOS 7 Problem

I’ll take them one at a time and try to outline why the “Low Cost” iPhone would make sense now as compared to the past.

The Screen Problem

The lineup, as it sits right now, is split between 4-inch and 3.5-inch devices (I include the iPod touch here as well). Half of the lineup is 4-inch (iPod touch and iPhone 5) and half is 3.5-inch (iPhone 4 and iPhone 4S).

If Apple would keep with its currently “plan” as it has been implemented in the past, you’d end up with a lineup that is three-quarter 4-inch (iPod touch, iPhone 5, and [probably] iPhone 5S) and one-quarter 3.5-inch (iPhone 4S). That really leaves that one iPhone out there on the edges.

It also would leave Apple trying to source screens at the 3.5-inch size for a single device. They didn’t even do that when they introduced the 4-inch size between the iPhone 5 and higher-end iPod touch were announced at the same time.

So, from a logistics standpoint, maybe it would make more sense for Apple to switch to a lower-cost iPhone with a 4-inch screen so that they would be able to eliminate the need for a smaller screen for a low volume product.

The Connector Problem

See the above but switch out the size of the screen for the type of connector (30-pin and Lightning).

I would imagine that this would also harken the end of the iPad 2 sticking around, or maybe a lower-cost iPad 2-ish product with a Lightning connector would be released as well. Apple wants to push ahead with this as quickly as possible, so eliminating the last three products they currently sell new in one move would be nothing but a net gain for the company.

Truth be told, the Lightning connector is such a huge win for consumers (forgetting that you need to buy new peripherals) that I could see Apple wanting to push it ahead as quickly as possible. It would also just make the whole lineup look better at the store with everything iPod touch, iPhone, and iPad having a Lightning cable attached.

The LTE Problem

LTE is big business right now as all four of the major carriers in the United States are upgrading their networks with Verizon way out ahead. If Apple continues with the past, you’ll have your lowest-cost iPhone (more than likely the 4S) without LTE, and that could be perceived as a negative.

However, releasing a lower-cost iPhone would allow them to offer the entire lineup with LTE from top-to-bottom. That would be good for Apple and good for the brand.

The iOS 7 Problem

My speculation would be that the lower-cost iPhone would include the A6 and not the A5 that would be found in the iPhone 4S. That would give it similar performance to the iPhone 5/iPod touch 5G … which is a bid deal for something like iOS 7 where the GPU performance is going to be key for people to have a good experience.

The blurring, the transparency, parallax, physics engine … you name it and it is going to require some horsepower to render at 60 fps (Apple’s stated goal). We already know Apple is shooting for the iPhone 4 with iOS 7 with a subset of those technologies included. While the iPhone 4S’s A5 was a big step up from the iPhone 4’s A4, it would be even better to have the A6 in there.

More power is better.

Conclusion

While I don’t know what Apple is going to do (obviously), I could see them releasing this lower-cost iPhone now because of the above reasons. I don’t care about colors, the case would be made of plastic and I would imagine the camera would be similar to what is currently in the iPod touch. Increase the thickness a little bit and I would imagine you can shave around $100 off of the iPhone 5 price (I’m just guessing here, I really have no idea) … and you hit your lower price point without losing any margin.

The best part? I wouldn’t hesitate to recommend such a phone to my family. It would “hit all of the high points” for me and also be the cheaper option. Offering LTE, an A6, 4-inch screen, and Lightning would make it a must-have phone while I would tell anyone to seriously consider an iPhone 5 otherwise.

So, there is my speculation. I now feel dirty.

 

Categories
Technology

Google Glass

J. D. Bentley over at Digital Asceticism pretty much mirrors my initial reaction to Google Glass from what I have seen, heard, and read.

Google Glass

One thing I had not put a lot of thought into is the why portion. He nails it pretty much on the head:

But what’s notable about Google Glass is that my dislike for it isn’t sustained primarily by my own unwillingness to use it, but my adamant opposition to being around those who do.

I will take another second to recommend his blog because it really is full of some really good insights into the intersection of technology and our lives.

Categories
Technology

A Single Computer

Right now I work between two (sometimes three) different machines.

In the past I worked mainly on a single laptop, my MacBook Pro (13-inch, Early 2011). Admittedly, this is a minor gripe, but an annoying part of using one machine between work and home was that I had no less than six cables to plug and unplug each time I moved desks.

Thunderbolt dock

However, something like the CalDigit Thunderbolt station might be exactly what I am looking for to alleviate those minor issues and maybe force me to using a single machine both at home and at work.

A single Thunderbolt cable handles all of the following:

  • Thunderbolt
  • HDMI out
  • USB 3.0 (2x back, 1x front)
  • Gigabit Ethernet
  • Audio In
  • Audio Out

That’s pretty nice and essentially handles all of my peripheral needs. Have a USB 3.0 port on the front is an added bonus. The only thing missing would be a FireWire 800 port, but those peripherals are hard enough to find.

That would be really cool. A single cable and you are up and running.

Of course, the real issue is whether it would work or not. I’d like to get my hands on one as soon as it is released … so time will tell.

Categories
Technology

A Manual Fusion Drive

Mac mini apart

This past Friday a package from Amazon was delivered for me and this is what I found inside (all Amazon affiliate links):

So. Cool.

That’s a lot of speed and quite a bit of work up there. The overall project, from start to finish took over a day, but it was split into three different parts.

Part One: Wife’s 2009 MacBook

  1. Swap wife’s 500 GB “spinning rust drive” for the 500 GB Samsung 840 Series SSD.
  2. Install old 500 GB drive into 2.5″ USB enclosure.
  3. Boot off of old 500 GB drive in USB enclosure and use SuperDuper! to create an exact copy on the new 500 GB SSD.
  4. Boot from new 500 GB SSD and confirm that things are working.
  5. Start and complete Time Machine backup before moving on.

That all went pretty smoothly. The longest step was #3 above as I copied everything over from the old hard drive, over USB 2.0, to the SSD. After the Time Machine backup was completed, then it was time to move onto Part Two.

Part Two: Work’s 2011 13″ MacBook Pro

  1. Take the “old” 500 GB drive in the external enclosure and hook it up to my work laptop.
  2. Clone current drive to the 500 GB drive.
  3. Take apart the external enclosure and swap the newly cloned drive for the 500 GB WD Scorpio Black that was currently the internal drive for the MacBook Pro.
  4. Boot off of the now-internal-old-drive-from-MacBook and verify things are working.
  5. Start a clone of the now-working drive to the new 750 GB external drive I had just received from Amazon.

When it was all said and done, the original drive for my 2011 MacBook Pro was back inside and being used as the boot drive. It is slower (the Scorpio Black is a 7200 RPM drive and the standard Apple-supplied drive is 5400 RPM), but I’m anticipating moving to an SSD at work soon too. This is just a preemptive strike in that direction.

Once the clone was started, I moved onto the main event.

Part Three: My 2012 Mac mini

  1.  Create a new clone of the Mac mini to an existing 500 GB USB 3.0 external hard drive.
  2. Take apart the Mac mini … completely.
  3. Use the OSB Data Double to install the 250 GB Samsung 840 Series SSD.
  4. Swap the standard internal 2.5″ 500 GB hard drive for the 500 GB Western Digital Scorpio Black I had just take out of the 2011 MacBook Pro.
  5. Put the Mac mini together … almost.
  6. Find that you forgot a single screw for the power supply.
  7. Take apart of the Mac mini … completely … again.
  8. Put the Mac mini together.
  9. Boot off of the new clone you made before you took the Mac mini apart.
  10. Create a new Fusion Drive using the command line version of Disk Utility.
  11. Clone your system onto the new Fusion Drive.
  12. Boot off of your new Fusion Drive and confirm things are working.
  13. Start and complete a Time Machine backup.
  14. Breathe.

If I wouldn’t have forgotten that screw, things would have gone a lot smoother. Luckily, it wasn’t a huge deal and I did get everything back together again without causing any damage. The Mac mini really is quite the dense piece of hardware and quite a bit of fun to take apart. Not for the novice, but if you have taken apart a laptop, the Mac mini is no more difficult.

Setting up the Fusion Drive using the SSD + HDD was quite simple once I dropped down to the CLI and just followed the directions. Cloning was quick over USB 3.0 and then things, really, just worked.

I was, however, not done.

Part Four: Clone, Clone, Clone

After it was all done, I had three external hard drives all sitting on my desk, but they did not currently have the appropriate machines cloned onto them. So I started SuperDuper! on each machine and hooked up the drives the following way:

  • 2009 MacBook – Former boot drive from Mac mini in USB 2.0 external enclosure
  • 2011 MacBook Pro – Old 500 GB WD My Passport USB 3.0 external hard drive
  • 2012 Mac mini – New 750 GB WD My Passport USB 3.0 external hard drive

Each machine attached to a drive of the proper size. I now have a clone of each machine along with Time Machine backups to my Time Capsule for the 2009 MacBook and 2012 Mac mini and CrashPlan online backups of all three.

That is really nice.

Conclusion

Fusion Drive

Was it worth all of the time and effort?

Absolutely. The oldest device, the 2009 MacBook, now feels like an entirely new machine. Adding an SSD has bought me some time, hopefully at least a year, until I need to seriously consider getting a new device for my wife to use. The biggest “win” is for Aperture, as it now loads after only a bounce or two and is much more usable than before.

That is really cool because that is the one application causing my wife the most trouble.

For the Mac mini, the Fusion Drive has been great. Having a 256 GB SSD means that everything is currently stored on the SSD. As I add more media, I will see if the performance is the same, but it is really nice to be back on an SSD and have the added storage of a “spinning rust” disk.

If you are getting a Mac and need a huge amount of storage, I would recommend looking at a Fusion Drive. If you don’t want to pull your Mac apart, just have Apple give you one and be happy. Be aware that YOU NEED TO BE BACKING UP EVERYTHING BECAUSE IF ONE DRIVE DIES EVERYTHING GOES AWAY. With that said, the speed increase is amazing.

However, if you have the technical acumen, feel free to do it yourself. It is not a big deal and can be quite a bit of fun.

Categories
Technology

HP Moonshot

I don’t deal with server hardware a ton, but these past two weeks have seen me installing a few RAID cards and working with XenServer quite a bit so the latest server offerings from HP caught my eye.

moonshotProdImg_471x292

So cool. So dense. I’m hoping that we see more and more work done to bring low-power-multi-core computing into the server room.