Categories
Life Technology

Technologists Anonymous

I have come out and just say it.

I’m addicted to technology.

Alright, that might be an overly broad statement, so I’ll specify it a little bit (but I’m not going to change my title).

I’m addicted to changing laptops.

It started way back into 2001 when I built my first computer from nothing but parts. I still remember the exact model numbers of what I used. ASUS A7V266-E/AA motherboard with an AMD Athlon XP 1800+ processor coupled with two sticks of 128MB of DDR RAM. A Sony CD-RW drive and a 60GB Seagate hard drive. Finally, an 8MB ATI Rage XL graphics card topped it off. All of it sat in a beige Antec case with a 300watt power supply. Oh, there was a floppy involved as well.

A week of my summer was spent putting it together and troubleshooting all of the problems I had. When you offset the power cable of the floppy drive by one pin, it will short out the system so that it will not boot. Learned that one the hard way.

Through the process I learned about formatting a hard drive, installing an operating system and just how computers are put together. It was wonderful. It was enlightening. I still marvel at the fact that my parents put up the money for me to build a computer for them, knowing full well that I had never done it before.

That computer lasted them eight years. EIGHT YEARS! Eight years with the most impressive updates being an ATI Radeon 8500 graphics card and 256MB of extra RAM. It still boggles my mind that the machine lasted that long.

I tell you that story so that what I have to tell has more effect. In 2005, I bought my first computer with my own money. It was a 15” Apple PowerBook G4. It was beautiful. It was powerful. It was fast.

It also was only the start of my laptop purchases over the next six years. Here is a list:

  • IBM Thinkpad R50
  • Apple Black MacBook
  • IBM Thinkpad X40
  • Apple 13”  MacBook Pro
  • Lenovo Thinkpad T61

I’ve been pretty consistent with one laptop purchase a year (including the PowerBook). Granted, each of new purchases has normally been bracketed by used laptops, but that is still a lot of change going on over time. That’s also just six years.

My parents used the same machine for eight years and I change my laptop every year. During the same time, I’ve had three different desktop machines (that includes the Mac Mini that we currently have right now). A better track record, but still worse than a single machine in eight years.

So, I have a problem, a huge one, when it comes to the tools that I use. A laptop is a tool. I have purchased more tools than I have actually created piece of software. I have more hammers than houses built. More spatulas than omelets . You get the picture.

Now, if each one of those had broken, for whatever reason, then I wouldn’t feel so bad. However, that is not the case. All of those, except for the R50, are still in working condition and I personally know exactly where three of them are (family and friends).

I have a problem. Now what is the solution?

I’m going to set a goal for myself, and then I’m going to probably break it so that I can keep it. The goal is to keep a laptop for three years, and that goes for each machine in my house.

Three years is the limit of AppleCare, and what I consider to be the reasonable lifespan of a computer. At that point, you tend to start to wonder if it is worth it to fix a machine because of its age, availability of parts, and speed increases available with newer hardware. At three years, even purchasing nice, new hardware from Apple, I would end up spending less money (far less) than I would if I keep up with my current Apple => used Thinkpad => Apple => used Thinkpad routine.

With my tool, I will then work on actually building usable software and providing some value besides new bells and whistles. If I would have followed this, here is what it would look like:

  • Apple PowerBook G4 (2005)
  • Apple Aluminum MacBook (2008)

That’s it! I would still have a perfectly usable Aluminum MacBook at my disposal with the AppleCare running out shortly and new MacBook Pros (or Airs) to choose from. That sure looks and sounds a lot nicer, doesn’t it.

It isn’t eight years, but it is a lot better than what I have been doing, and I know I can do better. Now I just need to.

Categories
Technology

State Your Price

One of my pet peeves at the moment happens to be websites which do not clearly display the prices of various services or products.

Canonical has brought this to the fore again. What I write has nothing to do with the company or their services (both of which I think are great), but has everything to do with their website.

If you are selling a product or service, hiding the price behind either sales representatives or registration walls is not going to make me more willing to part with my money. I might just end up paying more money to someone else because they clearly state their prices. This happens for a number of reasons:

  • I know what I am getting into. This probably goes without saying, but I like knowing what I might be paying right away so that I can start formulating what value the product might have. My mind needs that frame of reference and hiding it isn’t going to help me make a decision.
  • You seem more confident. Just come out and say what you are charging because you are confident that is what it is worth! Hiding the price just screams “you might not like this, so let us try and talk you into it.”
  • It is more honest. I’m going to be more willing to trust your company if you are honest with me, and part of that is laying out how much you are charging me. Yes, there are going to be times when I am going to have to contact a sales representative, but I already know that if I am an edge case. Let me make that decision.
  • No more steps needed. I am not required to take another step (call you or contact you) to continue with my research. As much as we might not want to admit it, price is a part of every decision (in determining value) so make it easy for me to do what research I need.

I’m more likely to leave a site and move onto a competitor than try and hunt for prices. Simple as that.

Categories
Life

A Saturday Project

One advantage to having a brother-in-law visit for the weekend (especially one who is both an architect and has extensive experience with fabrication) is that you can ask him to help you with a project and it will get done quickly.

This weekend, Paul and I built a workbench for my office. It has been on my list of things to do since we moved in and the need for a workbench (for computer work) has only increased since we moved into the house over a month ago.

I laid out my needs and he promptly came up with a plan in his head. Impressive. So we went to pick up the needed supplies:

  • 2″x4″ studs (twelve)
  • 49″x93″ high-density fiberboard sheet
  • 1lb 2 1/2″ #8 all-purpose screws
  • Phillips head bits (two)
  • #8 tap

All of that for under $100 and we were set to go … almost. I thought I knew where my corded drill was, but I was wrong (and now my wife keeps telling me I don’t have one, she’s probably right). So I headed out to get a cheap drill to get us through the day. I’ll be bringing it back to Target because the trigger sticks and it is terrible. One thing on my list is a decent set of power tools.

With an extension cord, drill, pencil, tape measure and improvised straightedge, we got to work.

It is better to just show you the progress.

start of bench

Prepared to make the first cuts on the high-density fiberboard. I really don’t have any tools, so we were using the studs as improvised horses so that we would not cut into the deck.

all of the materials in the office

Here you see all of the materials in my basement office, read to finally get put together. Word of the foolish for those who don’t know: be willing to spend money on tools. It will make the whole project easier.

What will become the lower shelf has a frame just like the top-level frame seen in the picture. The top of the workbench overlaps the L-shaped legs and gives it a really sleek look.

putting together the benchHere Paul is putting screws into the frame for the top of the workbench. You can see the lower shelf already in place and providing the structure for the legs as well. Really easy to put together.

the workbench finishedThis is the workbench as it stands right now. You can see the lower that is mainly used to house machines (and boxes for the moment). There is still some work I need to complete which mainly revolves around sanding and coating the shelf and top. I mounted a monitor on the wall for use on testing and debugging machines.

The workbench stands 38″ tall so that it is at a decent height for me to stand at and work on computers. It works quite well. I was able to put together my brother-in-laws new machine pretty easy. I need to figure out a lighting scheme for the area and also get some storage for tools on the wall or on the bench itself before I would consider it completed, but it is a huge step forward.

A huge thanks out to Paul and my wife (who watched our son while I worked on this with her own brother)!

Simplifying a Toolset

I tried working with Balsamiq Mockups today to see if I could incorporate it into my workflow for webpage design. Mainly I use paper + Sharpie as my toolset of choice for design mockups before I jump straights into HTML + CSS to get a working mockup.

I’m happy with how things work right now but I was wondering if a more digital tool would benefit me at all.

I’m sure it works wonderfully for other people, but I find that I’m too picky when working with a digital tool. I tend to try and get everything to line up properly, and spend more time crafting the mockup than I probably should. Balsamiq was no different. I spent maybe thirty minutes trying to put together a single webpage mockup and ended up trashing it

On the other hand, I spent maybe ten minutes with a couple of pieces of paper and some colored Sharpies to put together a few design mockups and come to some quick conclusions on what would and would not work (for those interested, why looking at the difference between three or four wells for content).

What does this mean? Not much. I just find that the simpler my toolset, the more I end up using it.

Categories
Life

Sweat the Big Stuff

As I was getting ready for bed last night, a phrase popped into my head.

It’s the small stuff that makes the difference.

It’s a true statement. In a lot of ways, the tiniest of details can make a huge difference between a good product and a great product. The way something feels can change how you interact with something. My Logitech MX620 wireless mouse feels infinitely better in the hand than a cheap Microsoft Basic Optical Mouse. You pay more, but the experience is better as well.

However, the small stuff wouldn’t matter if you don’t get the “big stuff” correct first. I don’t care how good the mouse feels in my hand if it can’t effectively track my movements. A cake with excellent frosting can taste terrible if the underlying cake is stale. A car can look awesome, but if it doesn’t have wheels it’s a huge paperweight on your front lawn.

What I’m basically saying is that before you can start fretting over the details you need to have your foundation in place. Sweat the big stuff and get that right, otherwise all of those small tweaks you make will be for nothing because you’ll still have a terrible product on your hands.

It will just look really good doing nothing.